How to mount the battery the P2000 from Pellenc pruner Kit
Published on 12/4/2015
Pruner P2000 battery is easily replaceable through battery kit proposed by batteries4pro: KIT BATTERY FOR PRUNER PELLENC P2000
If you don't have a soldering iron you can use the one above: ECONOMIC 30W SOLDERING IRON + TIN
- First you open the orange hull of the P2000 pruner. Be careful not to break the pins which are fragile. For this help you screwdriver to lever.
- Exit the blocks of batteries, and remove the foam of altimeter in order to reuse it later.
- Prepare the P2000 battery kit étamant the lugs to be welded. Make a beautiful ball of Tin on each lug.
- Unsolder the wires from the first block and resolder the new battery in place being careful to the polarities.
- Replace the thermo-fusible cleanly cutting the sheath thermo.
- Do the same on the other 2 blocks.
- Attach foam timing for new batteries
- Replace the blocks in the orange hull and close
Post related products
-
Pellenc P2000 Secor Battery Kit 2600369
-
Charger Type CB303R compatible pruner Pellenc P2000 Comp-CB303R
-
Soldering iron economic 40W + Tin 2433-30
Express delivery
- By carrier or
- By Postal Service
Professional Quality
Secured Payment
Last blog articles
-
Bosch drive unit error codes list
10/31/2019 -
Tips for preserving your PETZL headlamps
09/4/2018 -
Maintenance and storage of garden batteries
03/30/2018
Search in Blog
Par Marion N. (Les loges en josas, France métropolitaine) le 23 March 2024 :
Par Henri T. (St saturnin les Avignon , France métropolitaine) le 22 March 2024 :
Par Rosner E. (Geboltskirchen, Austria) le 21 March 2024 :
COMMENTS
No customer comments for the moment.